The ZXF D‑R X‑ray Digital Radiography (DR) inspection system’s standout feature is its rotary table with a dual‑tray switching design: by rotating, it alternates between two material trays—one inside the protective enclosure and one outside—enabling simultaneous loading and inspection. This parallel workflow dramatically boosts batch‑inspection throughput. The system is widely applicable to workpieces made of diverse materials, including aluminum alloys, cast iron, cast steel, and non‑metallic components. It integrates a 160/225 kV high‑frequency constant‑voltage X‑ray source, a large‑field‑of‑view amorphous‑silicon flat‑panel detector, and the X‑VISION 2.0 image‑enhancement software. Paired with a nine‑axis independent motion platform—five axes for the flat‑panel detector and four for the X‑ray source—the system delivers automated, multi‑position, multi‑angle inspections with no blind spots. An optional ADR automatic defect‑identification module, powered by neural networks with an accuracy of ≥95%, enables one‑click automated inspection and intelligent image analysis. The equipment is extensively used in automotive manufacturing (steering knuckles, engine blocks, cylinder heads, etc.), aerospace, precision manufacturing, and other industries.

Consultation Hotline:

0415-6277666

Leave a Message Online

E-mail

分享到：

Product Introduction
Technical Specifications
Case image

- Commodity name: Offline X-ray Digital Imaging Inspection System
- Commodity ID: ZXF D-R
- 射线能量 ( kV ): 225,160
- 检测类型: Offline individual testing,Cast-welded component inspection
- 设备类型: Medium-sized equipment
- 检测方式: Rotary Feeding Inspection
- 射线能量list: 160 kV | 225 kV
- 特点: Small/Standard/Large Equipment | Cast-Welded Component Inspection | Offline Inspection
- 标签蓝: Medium-sized equipment
- 标签绿: Rotary feeding
- 标签橙: Batch Workpiece Inspection
- 标签红: Image enhancement function
The ZXF D‑R X‑ray Digital Radiography (DR) inspection system’s standout feature is its rotary table with a dual‑tray switching design: by rotating, it alternates between two material trays—one inside the protective enclosure and one outside—enabling simultaneous loading and inspection. This parallel workflow dramatically boosts batch‑inspection throughput. The system is widely applicable to workpieces made of diverse materials, including aluminum alloys, cast iron, cast steel, and non‑metallic components. It integrates a 160/225 kV high‑frequency constant‑voltage X‑ray source, a large‑field‑of‑view amorphous‑silicon flat‑panel detector, and the X‑VISION 2.0 image‑enhancement software. Paired with a nine‑axis independent motion platform—five axes for the flat‑panel detector and four for the X‑ray source—the system delivers automated, multi‑position, multi‑angle inspections with no blind spots. An optional ADR automatic defect‑identification module, powered by neural networks with an accuracy of ≥95%, enables one‑click automated inspection and intelligent image analysis. The equipment is extensively used in automotive manufacturing (steering knuckles, engine blocks, cylinder heads, etc.), aerospace, precision manufacturing, and other industries.
Inspected product

Material Aluminum alloy, aluminum, cast iron, cast steel, non-metallic materials

Maximum Loading Dimensions 1170mm×670mm×400mm (L×W×H)

Maximum weight 25kg

Maximum thickness 100 mm (Al) / 20 mm (Fe)
150 mm (Al) / 30 mm (Fe)

X-ray machine

Maximum voltage 160kV/225kV

Maximum power 800W|1800W

Focus size EN12543 d=0.4mm/d=1.0mm

Imager

Imaging area 430mm x 430mm

Pixel size 140 μm

System Parameters

Image sensitivity Static sensitivity: 0.8–1.5% (after computer image processing)
Dynamic sensitivity: 2.5–3.5% (2 m/min)

System resolution 3.5 lp/mm (after image processing)

Leakage radiation dose <1.0 μSv/h (at 30 cm from the lead room)

Protective room dimensions Approximately 3.8 m × 2.3 (+1.1) m × 2.7 m (L × W × H)

Maximum weight Approximately 5 t/8 t

Offline X-ray Digital Imaging Inspection System

Online Consultation

Submit Now

Related products

PFS Series High-Frequency X-ray Machine

The PFS series high‑frequency X‑ray generators represent a next‑generation, upgraded product line. Featuring an integrated digital design, they enable comprehensive internal signal monitoring, ensuring operational stability and reliability. Their compact structure, combined with robust protection mechanisms, makes them suitable for a wide range of high‑end applications. An optimized control interface significantly enhances ease of use and precision. We offer full‑voltage‑range high‑frequency X‑ray solutions from 160 kV to 600 kV, delivering users an efficient and dependable experience. Applications: The PFS series high‑frequency X‑ray generators are widely employed in advanced fields such as aerospace nondestructive testing, online thickness measurement, security screening, material diffraction analysis, biological irradiation, and industrial CT imaging. They provide complete voltage‑range solutions from 160 kV to 600 kV, flexibly meeting diverse inspection requirements.

Induction-type Betatron

RAYSOV’s core‑developed inductive Betatron seamlessly combines high‑energy penetration with exceptional portability. With an ultra‑high 7.5 MeV energy output, it can penetrate up to 250 mm of equivalent steel thickness, and when paired with a high‑energy flat‑panel detector, enables real‑time digital imaging inspection of large components on site, delivering a precise and efficient solution for industrial nondestructive testing. Its innovative modular, lightweight design frees the system from the constraints of traditional gantry‑mounted inspection equipment, significantly enhancing mobility while maintaining superior inspection performance and substantially reducing installation and maintenance costs. Today, this equipment is widely deployed across numerous sectors, including aerospace, power and energy, rail transit, and green‑channel security screening.

Portable High-Frequency Constant-Voltage X-ray Machine

The PXU portable high‑frequency constant‑voltage X‑ray system is equipped with a self‑developed metal‑ceramic X‑ray tube, breaking the import‑dominated market and achieving independent control over core components. Leveraging high‑frequency constant‑voltage technology, it delivers stable output at 300 kV/900 W and can sustain continuous exposure for at least one hour in a 35°C environment without requiring downtime for cooling. Its lightweight design, IP65 protection rating, and wide operating temperature range of –20°C to +50°C enable single‑operator field deployment. The intelligent controller features a 6.5‑inch color display and dedicated adjustment keys, along with a built‑in exposure calculator and process library, ensuring efficient and user‑friendly operation. Key performance metrics—including penetration capability, sensitivity, and blackness—match those of imported systems, making it suitable for a broad range of applications such as petrochemical pipeline inspection, power‑grid maintenance, aerospace nondestructive testing, shipbuilding, and field‑based emergency flaw detection, thereby helping domestic NDT equipment advance toward the high end.

Smart Material Dispenser

An X-ray–based intelligent material‑inventory solution tailored for the SMT industry, leveraging AI algorithms to enable rapid, simultaneous four‑tray inventory counting with 99.99% accuracy. It is compatible with trays ranging from 7 to 17 inches and with precision IC packaging. The system can replace multiple manual workers, eliminate counting errors, and integrate seamlessly with ERP and MES systems, efficiently handling inbound, end‑of‑line, and warehouse inventory management.

Online Micro-Focus Inspection

Specifically designed for high-precision electronic component inspection, it can efficiently detect pad defects such as voids and solder bridges, and supports multiple package types including BGA and QFN. It features automated inspection and rapid programming capabilities. The equipment is widely used for full‑field inspection of SMT circuit board assemblies, FPC flexible‑circuit assemblies, semiconductor devices, and precision structural components.

Offline Micro-Focus Inspection

A general-purpose intelligent electronic defect‑inspection system, primarily used in the automotive electronics, energy electronics, home appliance, consumer electronics, and semiconductor industries. It enables nondestructive testing of a wide range of components, including SMT assemblies, LEDs, BGA packages, packaged devices, IGBTs, semiconductor devices, die‑cast parts, precision structural components, connectors, and other related parts.

Offline Micro-Focus Inspection

X-ray tube (microfocus)

PMO-300F microfocus X-ray tube, suitable for industrial CT and high‑penetration, high‑precision nondestructive testing of precision castings and large components.

X-ray tube (microfocus)

PMO-225F microfocus X-ray tube, suitable for industrial CT and high‑penetration, high‑precision nondestructive testing of precision castings and large components.

X-ray tube (microfocus)

A 160 kV high-voltage, sub-2 μm microfocus X-ray source delivers high‑precision imaging with a resolution of ≤2 μm, suitable for industrial nondestructive testing, precision component quality inspection, and other applications, providing stable and clear X-ray output.

$X-ray tube (diffraction)$

X-ray tube (diffraction)

The PTX-60/S X-ray diffraction tube, featuring multiple focal spot sizes and a high‑power output of 60 kV, is well suited for phase identification, structural analysis, and residual stress measurement of metals, inorganic crystals, polymers, and thin films. It is widely employed in materials research and development, industrial quality control, and scientific testing, providing a flexible and reliable X-ray source for the characterization of diverse crystalline materials.

$X-ray tube (diffraction)$

X-ray tube (diffraction)

The PTX-60/H X-ray diffraction tube is suitable for materials research and development, industrial quality control, and scientific testing applications, providing a high‑precision, stable X-ray source for the analysis of various crystal structures and phases.

$X-ray tube (diffraction)$

X-ray tube (diffraction)

The PTX-60/P X-ray diffraction tube is suitable for phase identification, structural analysis, and residual stress measurement of metallic materials, inorganic crystals, polymers, and thin-film coatings, and is widely used in materials research and development, industrial quality control, and scientific research and testing.

$X-ray tube (diffraction)$

X-ray tube (diffraction)

The products are widely used in four major fields—materials research and development, industrial quality control, geological exploration, and new‑energy catalysis—providing highly reliable X‑ray sources for crystallographic analysis, phase identification, and property characterization.

Metal-ceramic X-ray tube

PTX-601HP/11: A fully sealed, bipolar oil-cooled metal‑ceramic X‑ray tube operating from 20 to 600 kV, featuring a glass‑free design and vacuum‑sealed construction for maintenance‑free operation. It combines micro‑focus high‑resolution imaging with exceptional penetration capability, making it ideal for flaw detection in heavy castings, industrial CT, and high‑precision nondestructive testing of thick components.

Metal-ceramic X-ray tube

The PTX-550HP/11 is a fully sealed, bipolar oil‑cooled metal‑ceramic X‑ray tube operating at 20–550 kV. It features an all‑metal ceramic vacuum‑brazed seal, with no glass envelope, and comes factory‑sealed under permanent high vacuum for maintenance‑free operation. Combining ultra‑fine focal spot high‑definition imaging with exceptionally high penetration and high power, it is the leading high‑end X‑ray tube in China for the 550 kV voltage range, suitable for heavy‑duty industrial CT systems, automated DR flaw‑detection lines for large castings, and specialized high‑precision inspection equipment for thick alloy components.

Metal-ceramic X-ray tube

The PTX-500HP/11 is a 500 kV, bipolar, fully sealed, oil-cooled, high‑power microfocus metal‑ceramic X‑ray tube. It features an all‑metal ceramic hermetic seal, a glass‑free housing, and superior resistance to high‑voltage arcing. With permanent factory sealing that eliminates the need for vacuum pumping, it delivers both high‑resolution microfocus imaging and exceptionally high penetrating power. Designed for heavy‑duty industrial CT of thick‑walled components and high‑end precision DR flaw detection, it serves as the primary X‑ray source for high‑precision, nondestructive testing in the 500 kV voltage range, and is compatible with automated inline inspection systems and vertical industrial CT scanners.

Metal-ceramic X-ray tube

PTX-452Y is a 450 kV, bipolar, hermetically sealed, oil-cooled, Y‑type fan‑beam high‑power metal‑ceramic X‑ray tube. The “Y” designation denotes a wide fan‑shaped beam with dimensions of 90° × 20°. It features an all‑metal ceramic vacuum‑sealed construction and incorporates built‑in heavy‑metal filtration. Designed for large‑item vehicle security screening, container inspection, and high‑penetration, batch‑type DR flaw detection in thick steel, it delivers ultra‑high power under continuous operation and is compatible with stationary large‑scale security scanners and automated industrial‑part inspection lines.

Metal-ceramic X-ray tube

The PTX-450MF is a 450 kV bipolar, hermetically sealed, oil-cooled MF (Mesofocus) full‑metal ceramic directional X‑ray tube. It combines high‑power penetration with high‑precision imaging, falling between conventional large‑focus and ultra‑micro focus designs. Featuring an all‑ceramic, metal‑sealed vacuum chamber, it offers superior resistance to high‑voltage arcing and requires no evacuation, making it ideal for DR flaw detection of thick alloy components, industrial CT scanning of medium‑ to large‑sized parts, and precision inspection of thick‑walled special castings. It is the premier tube type for high‑resolution imaging of thick materials.